Ribbon sander Makita® 9911
Ribbon sander Makita 9911J is a compact and lightweight sander, it allows to carry out controlled exports thanks to its adjustable speed that allows you to choose the most suitable speed according to your needs.
Ribbon sander Makita 9911J 76 mm
The strip sanding machine Makita 9911J is very light and compact is a sanding machine with roller size 75 x 457 mm, and a 650W engine that ensures constant power.
Its adjustable speed allows you to work with a set of 75 to 270 m/min, thus offering the possibility to select the smoothing speed best suited to your needs and to the type of treated material.
This sanding machine is suitable for "occasional" sanding work or for low-consistency work as small finishings can be, its performance is in fact comparable to those of other tools in the same category that can be classified in the lower belt.
It has double insulation for extra overload protection and other boring problems, such as powder infiltrations, also has an integrated suction system that allows to collect the dust generated during sanding for excellent cleaning of the working area and greater efficiency of general use.
Comes with bag for canvas powder, roller abrasive paper and makpac transport case
- Adjustable speed
- Constant speed under effort
- Use the flat part and roller abrasive tape to smooth against edges.
- Using the optional set of clamps, the machine can also be used for stationary sanding for smaller pieces.
- High efficiency dust extraction with dust bag.
- Tape lock lever
- Possibility of overturned use
- Makpac briefcase
- Livello prodotto
- Adatto per:
- 455 mm
- 76 mm
- Correzione della corsa del nastro
- Velocità regolabile
- Si - Meccanicamente
- Velocità meccaniche
- Velocità a vuoto
- 75 - 270 m/min
- Tipo di motore
- 2,7 Kg
- 95 dB(A)
- Potenza assorbita
- 650 W
- 2,5 m/s²
- Tramite accessori
- Tensione (Volt)
- 230 V 50/60 hz
- Dimensioni ( Lar. X Pro. X Alt. )
- 262 x 130 x 130 mm
- Lunghezza cavo
- 2,5 Metri